Fuji PHZH1002

Recording Head
Type:PHZH1002
6Colors Head
1.When opening the pack of thw recording head.
①Tear the tape.
②Open the cap.
③Be sure to lightly press the nozzle surface (surface from which ink is discharged.) Make sure that the clothis properly impregnated with the 4 colours ooze out,it is ok.
Note:1.Do not use cloth other than the cloth provided as an accessory.
2.Do not fall the head or make any shock after opening the cap.It may cause leakage or no-spraying of the ink.
2.If the ink is not sprayed.
①Hold the recording head with turning the nozzle surface downward and push the side strong till spilling two drops.
②Absorb the standing ink on the nozzle surface with the cloth attached
③Hold the cloth to the nozzle surface again to find all colours flowed onto cloth.
Note:When a recording head is replaced to new one.Please set ink alarm clear in the main unit.(type:PHA,PHC)
Brand:Fuji Electric Co.,Ltd
Made in Japan